Motion Pro Digital Tire Pressure Gauge
0.1 psi accuracy digital gauge. 100 psi range. Battery powered.
Tire care is a short loop: set cold pressure, inspect the rubber, carry a repair plan, and clean enough road grime away to see what is happening. This roundup collects the 6 catalog products that support that loop without turning the bike into a rolling workshop.
For the deeper selection guidance, inspection signals, puncture decisions, and touring/storage checklist, continue to the Tire Care Buying Guide.
Some product links may earn MotoStash a commission from qualifying purchases. Read our full affiliate disclosure.
0.1 psi accuracy digital gauge. 100 psi range. Battery powered.
Compact analog gauge. 0–60 psi range. Pocket carry. Air-bleed button.

Ultra-compact tubeless tire repair. Plugs a puncture in 30 seconds. Aluminum body.

Dynaplug's smallest tool. Keychain-sized tubeless repair. Always with you.

Chain cleaner, bio lube, and chain brush. Complete drivetrain care kit.

Biodegradable nano-tech formula. Safe on all surfaces. Spray, rinse, done.
The Tire Care Buying Guide expands the selection, pressure, inspection, repair, and storage advice in this roundup.
Read the Tire Care Buying Guide →Check cold motorcycle tire pressure before every ride, using the motorcycle manufacturer's cold-pressure specification on the swingarm or VIN sticker. Recheck after a load change, tire service, or large temperature swing, and do not use the maximum pressure molded into the sidewall as the riding target.
Look for the molded tread-wear indicators across the grooves, then inspect for uneven wear, flat spots, and cupping. These signals, especially when paired with reduced tread depth or a changed handling feel, mean the tire needs a closer inspection and may need replacement.
Replace a motorcycle tire when the tread reaches its wear indicators, cords are visible, or you find cuts, cracks, bulges, sidewall or bead damage, severe uneven wear, or damage from underinflation or riding flat. Also follow the tire maker's age guidance even if usable tread remains.
A small puncture in the center tread of a tubeless tire is the usual roadside plug candidate when the tire has not been ridden flat. Shoulder, sidewall, gash, bead, tube-tire, or ridden-flat damage needs a shop assessment or replacement instead of a roadside repair.
Compare your usual surfaces and weather, commuting, touring, or mixed-surface use, expected distance, and passenger or cargo load with the tire maker's stated intended conditions. Stay within the motorcycle maker's approved specifications for tire size, load, and speed ratings.
Check the owner's manual or tire placard for your exact motorcycle model and year. Verify the front and rear sizes separately, along with required load and speed ratings, against the motorcycle manufacturer's approved fitment information. If anything is unclear, confirm with an authorized dealer or qualified tire shop.
6 catalog picks for pressure, repair, inspection, and the miles between them.
Shop Workshop Gear →